Top 10
- Viestiketjun aloittaja Clair
- Aloituspäivämäärä
ettelbruck
Well-known member
Eipä oo tuokaan risteys enää tuonnäköinen. Ja stoppimerkinkin ovat laittaneet ettei voi ottaa pientä vertailevaa kierrosta...Originally posted by Frank:
<STRONG>
</STRONG>
Otto Hokkanen
Well-known member
Siperian Bigfoot:
Ja tehoakin varmasti riittää:
[ 18-11-2001: Message edited by: Otto Hokkanen ]
Frank
Heimosoturi
Frank
Heimosoturi
Frank
Heimosoturi
Frank
Heimosoturi
Frank
Heimosoturi
Frank
Heimosoturi
Frank
Heimosoturi
Frank
Heimosoturi
Frank
Heimosoturi
Kaktus
Well-known member
- Liittynyt
- 20.7.2001
- Viestit
- 4980
-2001 Saleen S7 Features and Specifications-
GENERAL
Curb Weight 2,750 pounds (1250kg)
Weight Distribution, F/R 40% / 60%
Fuel Capacity 19 US Gal (72 Liters)
Wheelbase 106.25 in (2700mm)
Track, F/R 68.75in (1748mm) / 67.25 in (1710mm)
Width 78.3 inches (1990mm)
Front overhang 40.6 in (1031mm)
Rear overhang 41.1 in (1045mm)
Length 188 inches (4774mm)
Height 41 inches (1041mm)
Ground clearance 4 inches (100 mm)
Trunk Space, F/R 2.65 cu ft (6253.3cc) / 2.82 cu ft (6654.4cc)
CHASSIS
Space frame 4130 lightweight steel with honeycomb composite panels
ENGINE
Type All-Aluminum V-8 2V cam-in-block
Displacement 427 c.i.d. (7.0 liter)
Bore and Stroke 4 1/8" x 4.0" (104.8 x 101.6 mm)
Pistons Forged
Connecting Rods EN40B billet steel
Crankshaft 4340 forged billet steel
Induction system Roof intake feeding twin 80mm mass air meters feeding carbon fiber plenum. Magnesium oval bore throttle body (longitudinally mounted). Intake manifold: magnesium w/ 8 individual runners.
Heads CNC machined all-aluminum Saleen high flow
Valves Stainless steel with titanium retainers. Intake: 2.125" (54.0mm). Exhaust: 1.625 " (41.3mm). Beryllium exhaust seats.
Valve train Hydraulic roller lifter/roller rocker
Exhaust System Stainless steel high flow with merge collector incorporating dual catalysts per cylinder bank and EGR system
Required fuel 92 octane
Alternator 140 Amps
Battery 12 V
Front Engine Accessory Drive (FEAD) Compact drive system w/side-mounted water pump
Emission Control System OBD-II compliant, dual heated oxygen sensor per bank, high-volume EVAP system
Fly-wheel 5.5" (139.7mm) steel 4-plate
Fuel System High capacity returnless with 42 lb./hr. injectors
Oil system High vacuum dry sump configuration. Capacity: 12.6 qt. (12l). Aluminum oil tank.
Horsepower 550 hp @ 6400 rpm
Torque 525 ft.-lbs. @ 4000 RPM
Redline 7000 rpm
COOLING SYSTEM
Carbon fiber front intake feeding twin front-mounted aluminum water radiators w/ ECU controlled electric cooling fans. Twin side-mounted oil-air coolers.
ELECTRONICS
Saleen PowerFlash control system computer. Integrated coil-on-plug ignition system.
DRIVETRAIN
Transmission: Longitudinal, 6-speed all synchro-mesh transaxle
Transmission Ratios
1st 2.46
2nd 2.06
3rd 1.47
4th 1.18
5th 0.958
6th 0.74
Final drive ratio 3.22
Limited slip differential
Light-weight inboard and outboard tri-pod joints
High torque capacity steel halfshafts
Clutch : metallic 5.5" dia., 4-plate, hydraulic actuation
SUSPENSION
Front suspension system: Unequal length, double wishbones, light-weight aluminum dampers, w/ coilover springs. Front anti-roll bar.
CNC machined billet aluminum flow-through uprights.
Rear suspension system: Unequal length, double wishbones, light-weight aluminum dampers, with coilover springs.
CNC machined billet aluminum flow-through uprights.
BRAKES
Saleen engineered/Brembo supplied lightweight aluminum, six-piston calipers front/rear:
15 in. Ventilated Disc (Front)
14 in. Ventilated Disc (Rear)
Light-weight aluminum disc mounting bells
WHEELS AND TIRES
Saleen forged alloy wheels.
Center locking wheel nuts with automatic safety locks:
19 in. x 9.5 in. Front wheels
19 in. x 13 in. Rear wheels
High Performance Pirelli P-Zero Rossa Tires
Front 275/30-19
Rear 355/25-19
jmt
Senile Member
On se nyt kumma jos ei miestä kelpuuteta edes roskikseen
